Hi all <br><br>i was trying to configure tata photon + USB modem on ubuntu<br><br>some times my device is getting detected , and some other times it is not .... i get message as <br><br>Error mounting: mount exited with exit code 32: mount: block device /dev/sr1 is write-protected, mounting read-only<br>
mount: wrong fs type, bad option, bad superblock on /dev/sr1,<br> missing codepage or helper program, or other error<br> In some cases useful info is found in syslog - try<br> dmesg | tail or so<br><br>
<br>Error mounting: mount exited with exit code 32: mount: /dev/sr1 is not a valid block device<br><br>it has 8GB memory slot ( we need to add a card, i have not added )<br><br>when i did lsusb i got following output<br>rvcemcabrp@rvcemcabrp-laptop:~$ lsusb<br>
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>Bus 002 Device 012: ID 201e:2009 <br>Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>Bus 005 Device 018: ID 0a5c:2110 Broadcom Corp. Bluetooth Controller<br>
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub<br>Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br><br>when i did wvdialconf <br>
<br>rvcemcabrp@rvcemcabrp-laptop:~$ sudo wvdialconf<br>Editing `/etc/wvdial.conf'.<br><br>Scanning your serial ports for a modem.<br><br>Modem Port Scan<*1>: S0 S1 S2 S3 <br><br><br>Sorry, no modem was detected! Is it in use by another program?<br>
Did you configure it properly with setserial?<br><br>Please read the FAQ at <a href="http://open.nit.ca/wiki/?WvDial">http://open.nit.ca/wiki/?WvDial</a><br><br>If you still have problems, send mail to <<a href="mailto:wvdial-list@lists.nit.ca">wvdial-list@lists.nit.ca</a>>.<br>
rvcemcabrp@rvcemcabrp-laptop:~$ <br><br><br>if you have links of any success in configuring the device kindly forward<br><br><br>thanks in advance <br><br>renuka prasad<br>